Graphite Gland Packing

Enquiry Now

Graphite Gland Packing

We Are Graphite Gland Packing Manufacturer & Supplier in India. Graphite packings are self-lubricating, dimensionally stable, resistant to gases and fluids, and corrosion-proof. Graphite packings provide exceptional sealing qualities under harsh environments, resulting in longer equipment life and reduced maintenance. Graphite gland packings are suitable for dynamic sealing of centrifugal pumps for water, petroleum derivatives, and other chemicals, especially at high speeds and pressures.
High pressure and temperature seals can also be made with graphite packings. The graphite basis for graphite packings has a low coefficient of friction, high thermal conductivity and sliding velocity, great chemical resistance, and stays soft and pliable even at high temperatures and pressures.

Made of exceptionally pure graphite, graphite packing solutions provide unrivalled performance in industrial conditions where blistering heat and crushing pressures cause conventional packings to fail on a regular basis. Our graphite packing is designed to provide the user with the best return on investment in terms of leakage control, service life, and a trustworthy, cost-effective product.

Specification of Graphite Gland Packing are below :

Typical Physical Properties Unit
Weight 5 kg
1pH 0-14
Min, Temp. (Celsius) 200 ° C
Max, Temp. (Celsius) 650 ° C
Sizes 3.2mm, 5.0mm, 6,5mm, 8,0mm, 9,5mm, 11mm, 12.5mm, 14mm, 16mm, 19 mm, 22mm, 25mm.
Pr. Bar 100
Max Speed - Rotary 15 M./Sec
Max Speed - Reciprocating 2 M./Sec
Material Expanded Graphite

People also ask

  • What is the raw material of graphite?
  • The basis for synthetic graphite is formed by two raw materials: a carbon carrier that is as pure as possible, usually coal from crude oil, and pitch as a binder. The two raw materials are mixed to form a homogeneous mass and then processed and refined in complex high-temperature processes..
  • What is gland packing used for?
  • Gland Packings are anti-friction, heat-resistant seals that can be manufactured from a range of materials including PTFE, aramid, Kevlar and graphite. Typically applied to rotary equipment, such as steam valves and pumps, gland packings can also be used for static sealing operations on boiler joints.
  • How to choose gland packing?
  • Reinforced graphite gaskets are suitable for sealing against steam and most other media with the exception of strongly oxidizing reagents. They are recommended for use at 450°C and for pressures up to 2900psi.
  • What is the carbon content of reinforced graphite gaskets?
  • There are four main criteria for the selection of packing: chemical resistance or pH level, shaft linear speed, pressure in the flow system, medium temperature.
  • What is the temperature range of graphite?
  • A very wide temperature range without property alteration: -196 °C to 2,500 °C in an inert atmosphere, and up to 450 °C/550 °C in air. Very high compressibility.
  • What is the life of gland packing?
  • Proper lubrication of the gland packing requires a certain leakage rate. Special manufacturers recommendations are to be observed individually. Service life expectancy is between 1 and 2 years, this can sometimes extend to several years on favourable conditions.